A new cell has been developed, the Concorde Cell, in which the pre aerated feed is raised to supersonic velocities before passing into a high shear zone in the flotation cell. The local dissipation rate is of the order of 100 kW/m 3 , one to two orders of magnitude higher than is available in conventional mechanical cells.
PRINCIPLE...t., The Wemco flotation cell is an open trough type, self aerating mechanical flotation cell, which is shown in Fig. 2. The mechanism consists ofastar like rotor, which rotates insidetheshroud ordisperser.
See full list on 911metallurgist
Contact Cell Flotation. The flotation contact cell is a slurry aeration device with no moving parts. The contact cell consists of two main components: The contactor is a chamber in which feed slurry and flotation air are brought together under pressure. Pressure is maintained by a restriction located at the downstream end of the contactor ...
TankCell flotation units are built to last, with components and electrical equipment selected for maximum operating life. For instance, Outotec rotors and stators have proven to be the most wear resistant available. The wide range of cell sizes enables a compact, economical, and efficient plant design without the risk of short circuiting, even
With the results from the CFD modelling, FL Minerals is now moving the design of flotation cells to a new level the SuperCell which includes a category of large cells starting at a 300 m³ capacity.
Bateman has steadily developed the BQR flotation cells which have been in application for the past 30 years, and with its acquisition of Delkor in 2008, decided to rebrand the equipment into the Delkor equipment range.
The unit cell design Bateman cells are called HiFlo and HiClean machines. The Bateman mechanism consists of a hemispher ical shaped impeller which is connected to a solid drive shaft. The impeller is designed with no disc on the top and the impeller blades have both the top and bottom opened. The drive shaft is shrouded with a stand pipe.
Senior Flotation Metallurgist, Cadia Gold Mine, Orange, New South Wales, Australia . Abstract This paper discusses the methods used in the design of flotation plants, including benchscale batch and locked cycle tests and pilot plant trials. Two case studies are presented, one for the
June 10, 2020
Copyright © 2020.Company name All rights reserved.